2022-5-9 15:09| 發布者: steelfu4mo| 查看: 3406| 評論: 0 |原作者: 佛山萬慶物資
注：關于本產品標題，由于商品標題搜索功能的特性，為方便采購方的購物搜索，所起標題關鍵詞僅適用于搜索功能，不涉及廣告宣傳和功能描述。
溫馨提示：由于現貨市場浮動較大，店鋪所有規格均為參考價格，具體報價請咨詢客服，謝謝！
覆膜板是經高溫壓制復合制成的，它的致密以及強度都非常高，并且韌性也很不錯，它與木材相比的話，靜彎曲強度在它兩倍以上。覆膜板的寬度較寬，而且拼接部位也少，相較于鋁鋼模板的話，支拆速度會更快很多。同時，它的施工成本也會比較低，還能有效縮短工期。另外，這種材料的重量較輕，切割釘牢性也會比較好，所以使用起來非常的方便，速度也會更快；覆膜板具有很強的耐水性，在制造生產過程貨中，它每層都采用了酚醛樹脂，然后再熱壓成型，所以使用之后不容易出現面板變形等現象。同時，導熱系數相較于鋼膜來說，也會更低很多，所以無論是夏季還是冬季都能正常進行施工。在周轉率方面，覆膜板要比普通建筑模板高出很多，它的整體周轉率能達到18倍左右。由此可見適用范圍非常廣泛，無論是剪力墻、地鐵、天橋、隧道，還是其他類型的建筑上，這種材料都能使用。
The film plate is made by high temperature pressure composite, its density and strength are very high, and the toughness is very good, it compared with wood, its static bending strength is more than twice.The width of the coated plate is wider, and the splicing part is less, compared to the aluminum steel formwork, the support speed will be much faster.At the same time, its construction cost will be relatively low, but also can effectively shorten the construction period.In addition, the weight of this material is light, the cutting nail will be better, so it is very convenient to use, faster; film plate has strong water resistance, in the manufacturing process, it uses each layer of phenolic resin, and then hot press forming, so it is not easy to appear panel deformation after use.At the same time, the thermal conductivity compared with the steel film, will be much lower, so whether in summer or winter can be normal construction.In terms of the turnover rate, the film clad board is much higher than the ordinary building formwork, and its overall turnover rate can reach about 18 times.This shows that the scope of application is very wide, whether it is shear walls, subway, overpasses, tunnels, or other types of buildings, this material can be used.